{"product_id":"cartek-pdm-8c","title":"CARTEK PDM-8C","description":"\u003cp\u003eEight-channel power distribution module. It replaces the relay and fuse block in a harness with solid-state outputs, each one current-limited and given its function in configuration rather than in the loom.\u003c\/p\u003e\n\u003cp\u003eMade by CarTek. We stock it, and it is the power distribution path we build for higher-end clients.\u003c\/p\u003e\n\u003ch3\u003eOutputs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 × high current: 40 A limit each, 30 A continuous recommended\u003c\/li\u003e\n\u003cli\u003e4 × 20 A limit each, 15 A continuous recommended\u003c\/li\u003e\n\u003cli\u003e2 × optimised for wiper motors: 15 A limit each, 10 A continuous recommended\u003c\/li\u003e\n\u003cli\u003e120 A maximum total output\u003c\/li\u003e\n\u003cli\u003eSelectable soft start for high-inrush loads such as fans or pumps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInputs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e8 inputs: active low, active high, edge triggered, always on, or PWM signal to 200 Hz\u003c\/li\u003e\n\u003cli\u003e3 auxiliary inputs: ignition, hazard, wiper park, headlight flash\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFunctions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e6 standard output functions: input controlled, flashing at 1 Hz, timer on at 5 or 10 minutes, over-run at 5 or 10 minutes\u003c\/li\u003e\n\u003cli\u003ePre-set timed outputs for fuel pumps, rad fans, heated screen\u003c\/li\u003e\n\u003cli\u003e4 headlight functions covering tail, low beam, high beam and spot. Tail comes on automatically when either beam is active. Spot only turns on with high beam. Flash input with a choice of which lights flash and at what frequency\u003c\/li\u003e\n\u003cli\u003e3 wiper functions: low and high speed, plus a wash pump function that activates the high speed output. Park input configurable to falling edge (active low, most common) or rising edge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eConnections\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSealed 12-pin Amphenol (Deutsch DT) connectors, the same terminal family we run in the harness\u003c\/li\u003e\n\u003cli\u003eCrimps and mating connector supplied\u003c\/li\u003e\n\u003cli\u003eCAN Bus for diagnostic data: output status, volts, amps, configuration settings. Outputs can also be operated over CAN Bus\u003c\/li\u003e\n\u003cli\u003eRGB status LEDs for input and output state\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePhysical\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOperational voltage 8-18 V\u003c\/li\u003e\n\u003cli\u003e108 mm (4.35 in) long, 86 mm (2.75 in) wide\u003c\/li\u003e\n\u003cli\u003e220 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CarTek","offers":[{"title":"Default Title","offer_id":53893443747951,"sku":null,"price":740.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0742\/5248\/4719\/files\/CARTEK_0326_006-scaled_2038be88-bbaf-48d7-b10f-c36b841cebb8.jpg?v=1785195454","url":"https:\/\/faustec.com\/products\/cartek-pdm-8c","provider":"Faustec","version":"1.0","type":"link"}