{"product_id":"cartek-pdm-8c-radlock-kit","title":"CARTEK PDM-8C Radlock Kit","description":"\u003cp\u003eThe CarTek PDM-8C supplied with the BracketBoyz Radlock terminal that lands its main battery feed, so the high current side of the install arrives finished rather than sourced separately.\u003c\/p\u003e\u003cp\u003ePDM by CarTek, Radlock by BracketBoyz. We stock both.\u003c\/p\u003e\u003ch3\u003eIn the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCarTek PDM-8C eight-channel power distribution module\u003c\/li\u003e\n\u003cli\u003eRadlock 90 degree battery terminal, insulated\u003c\/li\u003e\n\u003cli\u003eInsulator sleeve for the terminal body\u003c\/li\u003e\n\u003cli\u003eRing lug and nyloc nut for the module stud\u003c\/li\u003e\n\u003cli\u003eTwo sealed 12-pin Amphenol (Deutsch DT) mating connectors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eOutputs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2 × high current: 40 A limit each, 30 A continuous recommended\u003c\/li\u003e\n\u003cli\u003e4 × 20 A limit each, 15 A continuous recommended\u003c\/li\u003e\n\u003cli\u003e2 × optimised for wiper motors: 15 A limit each, 10 A continuous recommended\u003c\/li\u003e\n\u003cli\u003e120 A maximum total output\u003c\/li\u003e\n\u003cli\u003eSelectable soft start for high-inrush loads such as fans or pumps\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInputs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8 inputs: active low, active high, edge triggered, always on, or PWM signal to 200 Hz\u003c\/li\u003e\n\u003cli\u003e3 auxiliary inputs: ignition, hazard, wiper park, headlight flash\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFunctions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 standard output functions: input controlled, flashing at 1 Hz, timer on at 5 or 10 minutes, over-run at 5 or 10 minutes\u003c\/li\u003e\n\u003cli\u003ePre-set timed outputs for fuel pumps, rad fans, heated screen\u003c\/li\u003e\n\u003cli\u003e4 headlight functions covering tail, low beam, high beam and spot. Tail comes on automatically when either beam is active. Spot only turns on with high beam. Flash input with a choice of which lights flash and at what frequency\u003c\/li\u003e\n\u003cli\u003e3 wiper functions: low and high speed, plus a wash pump function that activates the high speed output. Park input configurable to falling edge (active low, most common) or rising edge\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eConnections\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSealed 12-pin Amphenol (Deutsch DT) connectors, the same terminal family we run in the harness\u003c\/li\u003e\n\u003cli\u003eCrimps and mating connectors supplied\u003c\/li\u003e\n\u003cli\u003eCAN Bus for diagnostic data: output status, volts, amps, configuration settings. Outputs can also be operated over CAN Bus\u003c\/li\u003e\n\u003cli\u003eRGB status LEDs for input and output state\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePhysical\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOperational voltage 8-18 V\u003c\/li\u003e\n\u003cli\u003eModule 108 mm (4.35 in) long, 86 mm (2.75 in) wide\u003c\/li\u003e\n\u003cli\u003eModule 220 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CarTek","offers":[{"title":"Default Title","offer_id":54268459450479,"sku":null,"price":789.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0742\/5248\/4719\/files\/cartek-pdm-8c-radlock-kit-fitted.jpg?v=1789077128","url":"https:\/\/faustec.com\/products\/cartek-pdm-8c-radlock-kit","provider":"Faustec","version":"1.0","type":"link"}